-
Corona Replacement Spring (2 Pack) - Fits TP 6881 -
Since EHS cable cannot be hand splice, use these dead end cable wraps & the correct thimble to create insplicedin eyes for static cable installation.
-
12-Strand Polyester Rope Chain Slings are used as a low stretch anchor point for Arborists and Utility contractors. All Gear, Inc. Polyester Rope Chain Slings have a 2' Ballistic Nylon Outer Jacket which slides to cover any of the Rig Point Eyes for Extended Life. Premium Husky Urethane™ Coating is applied to provide excellent resistance to chemicals, sunlight and abrasion. -
All Gear's Polyethylene Throw Line is made to be extremely slick. Target Line™ has a striped pattern of Neon Orange and Yellow for visibility and is braided firmly to avoid snagging and abrasion. -
Secure sleeve and leg iron connection. 2 slotted hex-head bolts with lock washers and barrel-type nuts join the steel sleeve and leg iron together. Steel split ring secures ankle strap in place and allows for quick replacement. Climbers without upper pads and straps. -
Replacement Pole Climbing Gaffs to keep your Klein Tools Pole Climbing Equipment like-new. For use with the 1972AR series. Sold in pairs only. -
Hot-forged light alloy carabiner with an oval shape, triplex gate and elevated workloads. Particularly suitable for recovery and rescue operations, mountaineering, speleology, aid climbing and big wall. -
The rockGrab 90° is an advanced design over the traditional rope grab/adjuster. Featuring a 90° connection point, the grab excels on horizontal lines where it will properly orient with the D-ring on the harness. The rockGrab body is milled along the side to remove unnecessary material, making it one of the lightest grabs available. -
The Forester® Mini Wedge was created to jam into the cut created by a saw. Alleviates bar pinching. Small enough to fit anywhere so it's always there when you need it. -
Forester® Powerful 125dB Emergency Whistle. Exceeds 125dB rating. Includes carry case, 2 mouth pieces, & a #FOR-LANY lanyard. Hi-vis green. Durable & pealess, water does not effect performance. High Pitch, hear from a mile away. -
Personal 1st Aid Kit and Tool Pouch. -
Forester safety kit includes: Basic first aid manual, 10 antiseptic towelettes, 56 x 80 emergency blanket, 2 - 40 triangular bandages (non-sterile) 2-5x9 sterile combine pads, 4- 4x4 sterile gauze pads, whistle, notebook & pencil, 2 cold relief packs, eye & face shield/mask & poly latex gloves, cpr shield, 2 pairs latex gloves, wire splint, tourniquet, forceps and scissors, hema-flex 4 sterile bandage compresses sewn into 4x 2 stretch bandage w/ clip, box of 16-1 x 3 sterile adhesive strips, 4 rolls-1/2 x 2 yds adhesive tape, roll of gauze, roll stretch wrapwith clips, reusable handy tote box, and 8 x 10 combine pad. -
Forester® Super Slick Throw Line. Solid Braided Rope. 3/16” X 166'. No Memory High Strength. Low Friction. Non-Fraying. 100% polyester. Made for the Pro Arborist. Not for lifting. -
Helmet Meets ANSI/ISEA Z.89.1-2009 Type 1, Class E & G & Made in USA. NRR 21dB Muffs Rain Guard. Screen Meets ANSI Z87.1 Basic Requirements. 6 pt Ratchet Suspension. -
Lightweight. Fits 99% of all cones. Heavy-duty plastic twist-off bottom. 16" wide x 9" height. Printable. -
Forester® Adjustable Black Bucket Saw Scabbard. Compare to Jameson® OEM# 24-14A. Made for Aerial Buckets. Great Quality & Durability. Fits most Chainsaws & tools for outside of buckets. -
- Bent Gate
- Aluminum Alloy
- Anodized MBS ↔20 kN WEIGHT 3.0 oz
-
Appropriate for machines ranging from 40 to 85hp, the 900 series LoPro pockets are available in a straight, angle & reverse. These pockets take both the 900 series Greenteeth® & the 900 series Wearsharp®. -
The patented design of the Wearsharp® allows the tooth to retain a sharp cutting surface, unlike traditional teeth that tend to round over. Made with high-quality carbide, the Wearsharp® teeth provide a consistent cut throughout the life of the tooth. -
Appropriate for machines ranging from 20 to 45hp, the 700 series pockets are available in a straight, angle & reverse. These pockets take both the 700 series Greenteeth® & 700 series Wearsharp® teeth. -
The LoPro® bolts feature a 1/2” allen drive and are grade 8 heat treated for superior wear resistance. For use with LoPro® pockets, designed specifically to fit the angled shoulder of the LoPro® pocket. These bolts make up for the shortcomings of standard allen bolts. -
Marvin's "Bull" QCB features a 1 3/4" cut, dual pulley system, adapter and 15' of 3/8" rope (rope included). The QCB easily inserts into the female ferrule of your extension pole. All parts are replaceable. -
Marvin's PH5 pruner head features a 1 3/4" cut and a single pulley. All parts are replaceable. -
Block bolt and nut -
Replacement lower spring pin for PH5 "Bull" pruner head -
Replacement spring for PH4 pruner head -
Replacement spring for PH5 "Bull" pruner head -
Cap screw, washer, and nut -
Replacement pruner hook for PH4 pruner head -
Link pin -
Lever block (z-block) -
Eyebolt rope anchor for fiberglass poles -
PoleSaw head with a female end to fit on a blank fiberglass or wooden pole. This Saw head fits all pole saw blades. -
Now you can use Silky HAYAUCHI or IBUKI blades on your favorite fiberglass poles. Hole pattern only fits these 2 blades (saw blade not included) -
Pole extension couplings, male & female ferrule set. Locked by a spring clip that is easily controlled with thumb and forefinger. For fiberglass and octagonal wood poles. -
Female pole extension ferrule for fiberglass and octagonal wood poles. -
Male pole extension ferrule for fiberglass and octagonal wood poles. -
Spring clip for (Z-126) couplers for fiberglass and octagonal wood poles. -
Rope anchor for foam-filled poles. -
Air craft aluminum pruner adapter with eye bolt. -
Pulley trunnion pin -
The Ultra O's symmetrical rope baskets are ideal for assisted breaking devices, pulleys, swivels and shackles. They also give stable loading characteristics, as attachments can self-centre under load with minimal movement from the carabiner. -
Pulley -
Replacement link for PH4 pruner head -
Replacement link for PH5 "Bull" pruner head -
Replacement blade for PH4 pruner head -
Replacement blade for PH5 "Bull" pruner head -
Blade for pole saw mounting (also serves as a replacement blade for FI-1311 saw). -
Blade for pole saw mounting. -
Blade for pole saw mounting.
Limited time sale! Grab your favorites while supplies last! • Limited time sale! Grab your favorites while supplies last! • Limited time sale! Grab your favorites while supplies last! • Limited time sale! Grab your favorites while supplies last! •Limited time sale! Grab your favorites while supplies last! • Limited time sale! Grab your favorites while supplies last! • Limited time sale! Grab your favorites while supplies last! • Limited time sale! Grab your favorites while supplies last! •
FREE SHIPPING ON QUALIFYING ORDERS OVER $199
QUESTIONS? CALL 916-869-4820
